High Speed Gear Sure-Grip padded belt is designed to provide comfortable, slip-resistant stability needed to reduce back strain and general discomfort often caused by loose, sagging, and weighted belts.
The Sure-Grip including a modular system is a slim-profile belt that is only 19mm thick and 108mm high.
In the updated design of the Sure-Grip Padded Belt, the padding is made of neoprene. This material provides a 'gel-like' feel to the belt, increasing comfort and exceptional grip strength.
It also features a removable HDPE stiffener across the main body, where three continuous PALS/MOLLE rows are located. This feature is intended for times when additional stability is required.
Thanks to this patented removable stiffener, Sure-Grip is one of the most versatile military belts of its kind, making it an ideal support system across various conditions.
With three conveniently placed access points, the Sure-Grip allows seamless attachment of additional loads to the inner part of the belt, while the four attachment points for suspenders enable easy expansion.
- 19mm thick and 108mm high
- Neoprene padding creates 'gel-like' comfort
- Adds grip unique among all other belt systems on the market for attaching accessories such as holsters and magazine pouches directly to the inner belt
- Includes four strategically placed suspenders attachments
- Equipped with a removable HDPE stiffener that enhances stability
Sizing - READ CAREFULLY BEFORE ORDERING
Despite its name, this is not a belt in the traditional sense, but merely a cover for gear that requires a proper belt. For this, we recommend the HSGI Cobra Riggers Belt, but others may work as well. For the inner belt attachment, the hook-and-loop side has been sewn inside to keep the base and belt tight, but the inner belt can function without the counterpart of the hook-and-loop fastener.
The right fit for Sure-Grip is generally achieved when the ends come as close together as possible without overlapping. Measure your hip circumference over typical clothing using a cloth or tape measure. Sure-Grip wraps slightly further out than where the tape measure goes, so add approximately 7% to your measurement, or multiply the result by 1.07.
Example: If the user's circumference over their iliac crest is 86 cm, adding 7% makes the measurement 92 cm. The proper Sure-Grip size is medium, even though the original measurement of 86 cm suggests that medium would be too large.
When ordering HSGI Cobra Riggers Belt or Duty belt for use with Sure-Grip, refer to the table below for the suitable size in relation to Sure-Grip.
| Sure-Grip Size | Cobra Riggers Belt | SureGrip Duty Belt |
77 cm, of which PALS 59 cm | Small | M | Small |
90 cm, of which PALS 72 cm | Medium | L | Medium |
107 cm, of which PALS 89.5 cm | Large | XL | Large |
119 cm, of which PALS 100.5 cm | Extra Large | XXL | Extra Large |
Measurements and Weight:
US: 30.75'' - 46.25'' L x 0.75'' W x 4.25'' H / 0.79-1.25 lbs (depends on size, S-XL)
Metric: 78.10 cm - 116.8 cm L x 1.9 cm W x 11.2 cm H / 0.36-0.56 kg (depends on size, S-XL)
Lifetime warranty from HSGI. Made in the USA.
